Tuesday, October 6, 2015

Install J500GXXU1AOG4 Android 5.1.1 Lollipop on Galaxy J5 SM-J500G

J500GXXU1AOG4 Android 5.1.1 Lollipop official firmware for Samsung Galaxy J5 SM-J500G is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find J500GXXU1AOG4 download link along with flashing instructions and rooting guide (if available).


Samsung Galaxy J5 SM-J500G

J500GXXU1AOG4 Firmware Details:

Model: SM-J500G
Model Name: Samsung Galaxy J5
Version: Android 5.1.1 Lollipop
PDA: J500GXXU1AOG4

J500GXXU1AOG4 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

Cambodia: J500GXXU1AOG4_J500GOLB1AOG5_CAM

Philippines (Globe): J500GXXU1AOG4_J500GOLB1AOG5_GLB 

Philippines (Smart): J500GXXU1AOG4_J500GOLB1AOG5_SMA 

Malaysia: J500GXXU1AOG4_J500GOLB1AOG5_XME 

Indonesia: J500GXXU1AOG4_J500GOLB1AOG5_XSE
(Firmware for rest of the countries and carrier will be added here when available)
[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

J500GXXU1AOG4 Installation Methods:

There are several ways by which you can update the XXU1AOG4 firmware on your Galaxy J5 J500G such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy J5 SM-J500G via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy J5 SM-J500G through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update J500GXXU1AOG4 Firmware on Galaxy J5 J500G through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the XXU1AOG4 5.1.1 Lollipop firmware on your Galaxy J5 J500G through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy J5 SM-J500G model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power
2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy J5 and tap Build Number for 7 times to visible the Developer options.) See the image below.
Enable Developers Options
3) Backup important data and settings to external storage- follow this guide
4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  
5) If your Galaxy J5 J500G have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.
6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update J500GXXU1AOG4 5.1.1 Lollipop firmware on Galaxy J5 J500G through Odin: 

1) Download XXU1AOG4 5.1.1 Lollipop firmware for Galaxy J5 J500G from the above download section
2) Download Odin 3.09
3) Switch off and boot Galaxy J5 J500G into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.  
4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5) Now connect your Galaxy J5 J500G to your computer via USB cable
6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.
8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: J500GXXDLJ5_J500GODDDLI7_INU.tar.md5)
10) Now, click on the Start button to begin the installation process, wait few moments.
Odin3
11) Once completed, you would see “PASS!” message in ID:COM port having green background
12) Your device should automatically reboot after completion
13) You can now disconnect your device from computer
14) Finish
Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 5.1.1 Lollipop build version number XXU1AOG4. You can verify the firmware update details from Settings-About Phone.

Related:

Stuck at boot animation screen? Fix Bootloop on Galaxy J5 SM-J500G

If anything goes wrong, your device may stuck at booting animation. If your Galaxy J5 SM-J500G stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root J500GXXU1AOG4 5.1.1 Lollipop Firmware: 

Tutorial to root J500GXXU1AOG4 5.1.1 Lollipop firmware running on Samsung SM-J500G is not available at this moment. We'll update the link when available.
How to Root J500GXXU1AOG4 Android 5.1.1 Lollipop Firmware
Read more »
Posted by at No comments:
Labels:

S7562XXBMJ1 Android 4.0.4 ICS Firmware for Galaxy S Duos GT-S7562

Download and install the latest I9300XWUGML4 Android 4.3 Jelly Bean official firmware on Samsung Galaxy S3 GT-I9300 Smartphone. Samsung recently started rolling out an OTA update about the firmware. However, the firmware is currently released only for India. Hope it'll hit other part of the world very soon. The Galaxy S3 I9300 recently started receiving  Android 4.3 Jelly Bean firmware after a long wait. Samsung already released many regular firmware update till now and here we have the latest available firmware for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below step by step guide will help you to download and flash the latest I9300XWUGML4 Android 4.3 Jelly Bean Firmware manually through Odin.

Root I9300XWUGML4

If you already updated the I9300XWUGML4 firmware and looking for an easy to follow method to root the firmware, then follow this guide- Root I9300XWUGML4 4.3 Jelly Bean Firmware On Galaxy S3 GT-I9300- Simple Tutorial.
The latest Android 4.3 Jelly Bean official firmware is definitely a great update for the Galaxy S3 users as the device has been on Android 4.1.2 Jelly Bean from a long time. The latest firmware will upgrade the android version as well as will activate many new features, changes and improvements. Check out some of the new features and changes that coming with this latest update from below.

New features and changes in Android 4.3 Jelly Bean:

Galaxy S4 like lockscreen, Multi-pages feature on lockscreen, support widget on lockscreen, Tabbed UI in Settings, Daydream feature, Voice control feature for apps like phone, camera, music player and so on, Hands-free Mode, New Notification Panel with 2 pages, ANT+ support, TRIM support, Camera Improvements, Move apps to SD feature, New Samsung keyboard, Changed icons for some Samsung apps, Smoother TouchWiz, Adapt display, Adapt sound, New S-Voice from Galaxy S4, Full screen mode in Samsung apps and many more.

 So, want to update your Galaxy S3 I9300 to the latest I9300XWUGML4 Android 4.3 Jelly Bean firmware? For official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 XWUGML4 firmware on your Galaxy S3 I9300 through Odin.

Also Check: Samsung Galaxy S3 GT-I9300 Full Specifications and Features  

Important Note:

"The firmware is released only for the Samsung Galaxy S3 GT-I9300 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.3 Jelly Bean I9300XWUGML4 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S3 GT-I9300 model.

India: I9300XWUGML4_I9300ODDGML4_INS.zip
India: I9300XWUGML4_I9300ODDGML4_INU.zip
Nepal: I9300XWUGML4_I9300ODDGML4_NPL.zip
Sri Lanka: I9300XWUGML4_I9300ODDGML4_SLK.zip
Bangladesh: I9300XWUGML4_I9300ODDGML4_TML.zip 

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Official I9300XXUGML2 4.3 JB Firmware For Galaxy S3 GT-I9300- Installation Guide
ZNUBML1 Android 4.3 JB Stock ROM For Galaxy S3 GT-I9300 [How to Install]
Install UBUGMK6 4.3 JB Official ROM On Galaxy S3 GT-I9300 [How to Guide]
Install XXUGMK6 Android 4.3 JB Stable Stock Firmware On Galaxy S3 GT-I9300 [How to Guide]

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 I9300XWUGML4 official firmware on Galaxy S3 I9300.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S3 I9300 through Odin:

  1. Download Android 4.3 XWUGML4 Firmware for Galaxy S3 I9300 from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy S3 I9300 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S3 I9300 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9300XXDLJ5_I9300ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Read more »
Posted by at No comments:
Labels: , , ,

Update G361HXXU0AOG3 Android 5.1.1 Lollipop on Galaxy Core Prime SM-G361H

G361HXXU0AOG3 Android 5.1.1 Lollipop official firmware for Samsung Galaxy Core Prime SM-G361H is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find G361HXXU0AOG3 download link along with flashing instructions and rooting guide (if available).


Samsung Galaxy Core Prime SM-G361H

G361HXXU0AOG3 Firmware Details:

Model: SM-G361H
Model Name: Samsung Galaxy Core Prime
Version: Android 5.1.1 Lollipop
PDA: G361HXXU0AOG3

G361HXXU0AOG3 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

Kenya: G361HXXU0AOG3_G361HOJV0AOG1_AFR
(Firmware for rest of the countries and carrier will be added here when available)
[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

G361HXXU0AOG3 Installation Methods:

There are several ways by which you can update the XXU0AOG3 firmware on your Galaxy Core Prime G361H such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy Core Prime SM-G361H via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy Core Prime SM-G361H through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update G361HXXU0AOG3 Firmware on Galaxy Core Prime G361H through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the XXU0AOG3 5.1.1 Lollipop firmware on your Galaxy Core Prime G361H through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy Core Prime SM-G361H model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power
2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Core Prime and tap Build Number for 7 times to visible the Developer options.) See the image below.
Enable Developers Options
3) Backup important data and settings to external storage- follow this guide
4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  
5) If your Galaxy Core Prime G361H have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.
6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update G361HXXU0AOG3 5.1.1 Lollipop firmware on Galaxy Core Prime G361H through Odin: 

1) Download XXU0AOG3 5.1.1 Lollipop firmware for Galaxy Core Prime G361H from the above download section
2) Download Odin 3.09
3) Switch off and boot Galaxy Core Prime G361H into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.  
4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5) Now connect your Galaxy Core Prime G361H to your computer via USB cable
6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.
8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: G361HXXDLJ5_G361HODDDLI7_INU.tar.md5)
10) Now, click on the Start button to begin the installation process, wait few moments.
Odin3
11) Once completed, you would see “PASS!” message in ID:COM port having green background
12) Your device should automatically reboot after completion
13) You can now disconnect your device from computer
14) Finish
Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 5.1.1 Lollipop build version number XXU0AOG3. You can verify the firmware update details from Settings-About Phone.

Related:

Stuck at boot animation screen? Fix Bootloop on Galaxy Core Prime SM-G361H

If anything goes wrong, your device may stuck at booting animation. If your Galaxy Core Prime SM-G361H stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root G361HXXU0AOG3 5.1.1 Lollipop Firmware: 

Tutorial to root G361HXXU0AOG3 5.1.1 Lollipop firmware running on Samsung SM-G361H is not available at this moment. We'll update the link when available.
How to Root G361HXXU0AOG3 Android 5.1.1 Lollipop Firmware
Read more »
Posted by at No comments:
Labels:

S6310DXAME1 Android 4.1.2 Jelly Bean Firmware for Galaxy Young GT-S6310 [How to Install]

Root S6310DXAME1

If you already updated the S6310DXAME1 firmware and looking for an easy to follow method to root the firmware, then follow this guide- Root S6310DXAME1 Android 4.1.2 Stock Firmware On Galaxy Young GT-S6310- Simple Tutorial.

As the Galaxy Young already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Young S6310 to the latest DXAME1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 S6310DXAME1 firmware on your Galaxy Young S6310 through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Young GT-S6310 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.1.2 Jelly Bean S6310DXAME1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Young GT-S6310 model.
[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be Noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S6310DXAME1 official firmware on Galaxy Young S6310.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310 through Odin:

  1. Download Android 4.1.2 DXAME1 Firmware for Galaxy Young S6310 from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Young S6310 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Young S6310 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: S6310XXDLJ5_S6310ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! you have completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Young GT-S6310. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Young should now running on the latest Android 4.1.2 Jelly Bean build version DXAME1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.
Read more »
Posted by at No comments:
Labels:

Drivers for Android Phone for Windows PC

List of USB Drivers for Android Last Updated on 17-Feb-2014. USB Drivers play a vital role when we wish to connect our phone to computer. You need to install USB Driver first for your mobile device to get connect and interact with your PC and the Android Smartphone and Tablet devices are not exception. We do various task by connecting our phone to PC such as- transferring data between computer and phone, syncing mobile to PC, rooting android phone, installing custom recovery like CWM Recover or TWRP Recovery, updating official firmware or flashing custom firmware. We need to use some tools like Odin, SuperOneClick etc. So, without installing  the proper USB driver for your phone, you can’t connect it with your PC and do all these important task.


In this article, you’ll find USB Drivers for Android Devices for almost all Android Smartphone and tablets manufacturers such as- Samsung, Motorola, Sony, LG, HTC, Micromax, Acer, Dell, Lenovo, Asus, ZTE and many more. Although all the android mobile manufacturers provide USB drivers for their device along with the device model but you can also download drivers from their support page or anywhere else online. One more notable thing is, for most branded device windows install the USB driver automatically but if it's not done, you have to do it manually.

Here we have listed USB drivers for android devices for almost all manufacturers. Note that, single USB driver from a manufacturer can be used for all the models of that manufacturer, so you do not need to download separate USB driver for all the models of the same manufacturer. Download USB driver for your android phone from the below list.

Also Read: Complete Data Backup Guide for Android Mobile

Note: All the USB drivers here listed are only for the Windows PC. If you are looking Android USB Drivers for Mac or Linux, then we recommend you to visit respective manufacturer website and download from their support page.

Download Android USB Driver for Samsung Mobile

Download Samsung USB Driver
Download Samsung Kies Utility
Or Direct Download Samsung Kies from Here

Download Android USB Driver for LG Mobile

Download LG USB Driver

Download Android USB Driver for HTC Mobile

Download HTC Sync Manager
or Direct Download HTC Sync Manager from Here

Download USB Driver for Motorola Mobile

Download Motorola Device Manager

Download USB Driver for SONY Mobile

Download Sony PC Companion
or Download Latest Sony PC Companion from here

Download USB Driver for Asus Mobile

Download Asus PC Suite
Download Asus USB Driver  or  Download Asus USB Driver
Download Asus Nexus 7 USB Driver  or  Download Asus Nexus 7 USB Driver

Download USB Driver for Acer Mobile

Currently we do not have any direct download link for Acer USB Driver. You can download Acer Android USB Driver from the below process:
  • Go to Support page of Acer
  • Choose country
  • Select Drivers and Manuals
  • Select your device
  • Select OS and Download driver from there

Download USB Driver for Lenovo Mobile  

Download Lenovo USB Driver

Download USB Driver for Dell Mobile

No direct download link available. Follow the below step by step guide to download USB driver for Dell android mobile:

Download USB Driver for ZTE Mobile

Download ZTE USB Driver  or Download ZTE USB Driver

Download USB Driver for Huawei Mobile

Download Huawei HiSuite
Download Huawei USB Driver

Download USB Driver for Intel Mobile

Download Intel USB Driver

Download USB Driver for Amazon Mobile

Download Amazon USB Driver  or Download Amazon USB Drivers

Download USB Driver for Sharp Mobile

Download Sharp USB Driver

Download USB Driver for Pantech

Download Pantech USB Driver

Download USB Driver for Alcatel Mobile

Download Alcatel One Touch USB Driver

Download USB Driver for Fujitso Mobile

Download Fujitso USB Driver

Download USB Driver for XIAOMI Mobile

Download XIAOMI USB Driver

Download USB Driver for Asus Garmin

Download Garminfone PC Sync Software

Download USB Driver for KT Tech Mobile

Download KT Tech USB Driver

Download USB Driver for Kyocera Mobile

Download Kyocera USB Driver

Download USB Driver for Pegatron Mobile

Download Pegatron USB Driver

Download USB Driver for Teleepoch USB Driver

Download Virgin Mobile Chaser USB Driver

Download USB Driver for Oppo Mobile

Download Oppo Find 5 USB Driver

So, find USB driver for your android Smartphone or tablet from the above list. We have covered as much Android USB Drivers from various manufacturer. Hope you find USB driver for your android phone. If your android phone manufacturer is not in the above list, then contact with us with your mobile manufacturer name, model name and code number using the comment form below, we’ll help you to get USB driver for your mobile. 
Read more »
Posted by at No comments:
Labels:

Monday, October 5, 2015

BlackBerry Venice Android Slider to feature BB Productivity Suite and more

BlackBerry Venice Android Slider to feature BB Productivity Suite and more

BlackBerry's Venice Android slider smartphone has been in the news for quite sometime now courtesy Evan Blass. Venice is said to be the company's first Android phone with a slide out QWERTY keyboard.

Also known as @evleaks, the new leak from suggests that BlackBerry Venice will come with BlackBerry Productive Suite. On of the leaks show screenshot that comprises a list of BlackBerry related .apk files. Plus there is a video that demos the BlackBerry Productivity Suite running on the Venice Slider.

BlackBerry Productivity Suite includes the BlackBerry Hub, BlackBerry Calendar, BlackBerry Contacts, Documents to Go, Input, and Universal Search. BlackBerry's Communication Suite includes BBM, Worklife for BlackBerry, BBM Meetings, BBM Protected, SecuSuite for BlackBerry, and Global Support. Lastly, the Security Suite includes BlackBerry Enterprise Service 12, VPN Authentication, Secure Work Spaces, Enterprise Identity by BlackBerry, BlackBerry Blend, and Password Keeper.

BlackBerry Venice Android Slider to feature BB Productivity Suite and more

BlackBerry's Android phone will have some of the company's important BB10 features and the company will also bundle its own offerings to differentiate the phone from the rest running Android. The presence of a large number of pre-loaded apps points out that BlackBerry Venice will not be a stock Android device.

As per previous rumors, the BlackBerry Venice is said to feature 5.4-inch Quad HD display,  a 1.8 GHz Hexa-core Snapdragon 808 64-bit SoC, 3GB RAM, come with a 18-megapixel rear camera and a 5-megapixel front-facing camera. It is said to be available through Sprint, T-Mobile, AT&T and Verizon in November.
Read more »
Posted by at No comments:
Labels: , ,

Karbonn Titanium S200 HD with 8MP camera launched for Rs. 4,999

Karbonn Titanium S200 HD with 8MP camera launched for Rs. 4,999
Karbonn's latest offering to the Indian market is the budget phone, Titanium S200 HD. It comes with dual-SIM functionalities and runs Android 4.4 KitKat out of the box. There is also support for 21 Indian languages and a dedicated user interface for five regional languages.

Karbonn Titanium S200 HD features 5-inch HD (1280 x 720 pixels) IPS display and is powered by 1.2GHz quad-core Spreadtrum 7731 processor with 1GB RAM, 8GB storage, further expandable via microSD card up to 32GB. For imaging there is 8-megapixel rear camera with dual LED flash and 3.2-megapixel front shooter. Connectivity options include 3G HSPA+, WiFi, Bluetooth 4.0 and GPS. It is fueled by 2600mAh battery
which is rated to deliver up to 9 hours of talk time on 3G and 650 hours of standby time.

Priced at Rs. 4,999, Karbonnn Titanium S200 HD will be available exclusively from Snapdeal. The phone comes in Coffee Champagne color only and comes bundled with a free protective case.
Read more »
Posted by at No comments:
Labels: , , , ,

Samsung Galaxy J1 Ace available in India for Rs. 6,400

Samsung Galaxy J1 Ace available in India for Rs. 6,400

Samsung's latest offering, a entry-level phone, Galaxy J1 Ace has silently gone on sale in India. According to Mumbai-based retailer Mahesh Telecom, the phone is now available in the brick-and-mortar stores across the country.

Samsung Galaxy J1 Ace features 4.3-inch WVGA (480 x 800 pixels) Super AMOLED display and is powered by 1.3GHz dual-core processor with 512 MB RAM and 4GB storage. MicroSD card upto 64GB is supported for storage expansion. The phone runs Android 4.4 KitKat, has dual-SIM slot and supports 3G HSPA+, WiFi, Bluetooth 4.0 and GPS connectivity. For imaging there is 5-megapixel auto-focus rear camera with LED flash and 2-megapixel front facing camera. It is fueled by 1800mAh battery and comes with Ultra Power Saving Mode.

The Samsung J1 Ace is priced at Rs. 6,400 and is available to buy via physical stores. It comes in Black or White colors. With the specs in offer, this phone will not find many takers
Read more »
Posted by at No comments:
Labels: , , , ,

Intex Cloud V with 5-inch display, 8MP shooter available online for Rs. 3,999

Intex Cloud V with 5-inch display, 8MP shooter available online for Rs. 3,999

Intex Cloud V, the comapny's latest entry-level phone is now available via eBay India for Rs. 3,999. The budged offering has dual-SIM slot and runs Android 4.4.2 KitKat out of the box.

Intex Cloud V features 5-inch FWVGA (480 x 854 pixels) TFT display and is powered by 1.2GHz quad-core Spreadtrum SC7731 processor with 512MB RAM and 8GB storage. There is microSD card support up to 32GB. For imaging, there is 8-megapixel rear camera with LED flash and 2-megapixel front shooter. 

On the connectivity front, the phone supports 3G, WiFi, Bluetooth, micro-USB and GPS. It is fueled by 2000mAh battery and comes in silver color only. The phone features sensor such as accelerometer, ambient light sensor, and proximity sensor.
Read more »
Posted by at No comments:
Labels: , , , , ,

Android Wear smartwatches now works with iPhones

Android Wear smartwatches now works with iPhones
Google has announced Android Wear support for iOS. The search giant has launched Android Wear companion app, so that Android Wear smartwatches will work with Apple's iPhones. They will now work with iPhone 5 or later devices, running iOS 8.2 or later.

Once paired with your iPhone, Android Wear smartwatches can display alerts for calls, messages and notification. It also syncs your fitness data, but currently there is no support for third party apps and integrates only with Google apps like Google search, Calendar and Gmail. You can also use 'Ok Google' voice commands to set Google Now reminders, open the weather app and more.

Users will only be able to view incoming messages, but will not be able to reply from the watch face. Calls can be answered or ignored, but users will still need to use their iPhones to talk.
  
Highlights of Android Wear for iOS
  • Get your info at a glance: Check important info like phone calls, messages, and notifications from your favorite apps. Android Wear features always-on displays, so you’ll never have to move your wrist to wake up your watch.
  • Follow your fitness: Set fitness goals, and get daily and weekly views of your progress. Your watch automatically tracks walking and running, and even measures your heart rate.
  • Save time with smart help: Receive timely tips like when to leave for appointments, current traffic info, and flight status. Just say “Ok Google” to ask questions like “Is it going to rain in London tomorrow?” or create to-dos with “Remind me to pack an umbrella.”
Android Wear for iOS currently works with LG Watch Urbane, Moto 360 and upcoming Android Wear watched like Huawei Watch and Asus ZenWatch 2.



Read more »
Posted by at No comments:
Labels: , ,

'Shatterproof' Motorola Bounce with Snapdragon 810 SoC leaks

'Shatterproof' Motorola Bounce with Snapdragon 810 SoC leaks
Motorola is said to be woring on a new, more powerful and rugged phone dubbed Motorola Bounce. Image and specs of the device has been outed courtesy of @upleaks. Motorola Bounce looks a slightly upgraded version of Moto X Style.

As per the leak, Motorola Bounced bears 5.43-inch Quad HD (1440 x 2560 pixels) display and will be powered by Snapdragon 810 processor further aided by Adreno 430 GPU and 2GB RAM. For imaging, there is 21-megapixel rear camera and 5-megapixel front shooter. The battery capacity is said to be 3760mAh. The device will come in two storage models- 32GB and 64GB. The phone will have a shaterproof design which could indicate a MIL-STD rating and is likely to be waterproof as well.

Motorola Bounce is expected to launch in December and is likely to run Android 6.0 Marshmallow. 


Read more »
Posted by at No comments:
Labels: , ,

Leak reveals Xiaomi Mi 4c to come with Snapdragon 808 SoC, USB Type-C port

Leak reveals Xiaomi Mi 4c to come with Snapdragon 808 SoC, USB Type-C port

Xiaomi's alleged new Mi 4c smartphone is said to be an advanced model of the Mi 4i. The phone posed for the camera at TENAA and was spotted at AnTuTu benchmark listing last month. Now the phone is in the news again and this time the packaged retail box of the phone showing all the specs has hit the inter webs.

The specification on the retail box tips that Mi 4c will house USB Type-C port. The Mi 4c features 5-inch Full HD display (~441 ppi) and is powered by Snapdragon 808 processor with Adreno 418 GPU, 2GB and 16GB storage. 

Leak reveals Xiaomi Mi 4c to come with Snapdragon 808 SoC, USB Type-C port

Camerawise, there is 13-megapixel rear camera and 5-megapixel front facing camera for clicking photos. There is 4G LTE support and a 3080mAh battery to give the device life.

Xiaomi is expected to unveil the Mi 4c on September 24 and the sales begin October 3. It is said to priced around CNY 1299 and Xiaomi is planning to offer only 1 lakh units of Mi 4c.
Read more »
Posted by at No comments:
Labels: , ,

LG G Pad II 10.1 with Snapdragon 800 SoC announced

LG G Pad II 10.1 with Snapdragon 800 SoC announced
  
Earlier this month LG announced the G Pad II 8.0 tablet in South Korea. Now the company has announced the successor to the G Pad 10.1, the G Pad II 10.1. The tablet will be showcased at IFA 2015, Berlin next month (September 4 to 9). It has a soft metallic finish, is 7.8mm thick and comes in WiFi only and LTE models.

LG says that it has the slimmest bezel among similar tablet with 10-inch screen. The tablet comes with Read Mode, which while reading ebooks reduces the blue light of the display backlight. There is a Dual Windows mode that divides the screen allowing two apps to run at a time. Also there is Quick Memo+ which allows users to create, save and share memos from any screen. Additionally that tablet comes pre-loaded with Microsoft office suite off apps and 100GB of free OneDrive storage for two years.

As for the specs, the LG G Pad II 10.1 features 10.1-inch WUXGA (1920 x 1200) display and is powered by 2.26GHz quad-core Snapdragon 800 processor with 2GB RAM and 16GB storage (microSD card slot present). It runs Android 5.1 Lollipop and supports 4G LTE, WiFi 802.11 a/b/g/n/ac, Bluetooth 4.1 and GPS. Camerawise, it sports 5-megapixel rear and 2-megapixel front facing camera. It is fueled by 7400mAh battery.

The LG G Pad II 10.1 will roll out in Key markets in North America, Europe and Asia starting from September. Pricing will be announced locally during the launch.
Read more »
Posted by at No comments:
Labels: , , ,

Samsung Gear S2 circular Tizen-based smartwatch gets official

Samsung Gear S2 circular Tizen-based smartwatch gets official
Samsung has unveiled its latest range of Gear S2 smartwatches, Gear S2, Gear S2 3G and Gear S2 Classic. The Gear S2 and Gear S2 3G models comes with silicone band offering a minimal and modern design while the Gear S2 Classic features a more premium black finish and a matching genuine leather strap.

All three run on comapany's home grown Tizen based wearable platform and sports a circular display with rotating bezels that allows users to scroll, zoom, etc. They also have home and back buttons to access apps and notifications. 

Samsung's Gear S2 sports a 1.2-inch circular Super AMOLED display with 360 x 360 pixel resolution (~302ppi) and is powered by 1GHz dual-core processor with 512MB RAM and 4GB storage. They are IP68 certified for dust and water resistant. They connect with compatible devices via Bluetooth 4.1 LE, and offer NFC support for mobile payments. It also features an accelerometer, gyroscope, heart rate sensor, ambient light sensor, and barometer. It is powered by a 250mAh battery that supports wireless charging and is IP68 cerified for dust and water resistant.

The Gear S2 3G has built-in e-SIM support that lets you independently make and receive calls, without connecting to a device and also offers 3G support. It is backed by  300mAh Li-ion battery (Gear S2 3G) that also supports wireless charging. Rest of the specs are same as standard model.

Samsung promises two to three days of battery life for the Gear S2, compared with Apple Watch's 18 hours.

The Gear S2 has dimensions of 42.3x49.8x11.4mm, weighs 47 grams and comes in Dark Grey case w/ Dark Grey band and Silver case w/ White band. The Gear S2 Classic has dimensions of 39.9x43.6x11.4mm, weighs 42 grams and comes in Black case w/ Leather band.

Read more »
Posted by at No comments:
Labels: , , , , , ,

Motorola Moto X Play to launch in India on September 14

Motorola Moto X Play to launch in India on September 14

Motorola is all set to bring the Moto X play to India. The company has sent out press invites for the launch of Moto X Play in the country on September 14.

The company also teased the launch of Moto X Play on its official Twitter India account by posting an image which read "No more getting dumped by your phone. Your perfect partner is coming with 30 hours of battery backup. #XOMotoX". The phone. In addition Flipkart has dedicated a page to the Moto X Play, so it is expected to go on sale on the same day it is launched.

To remind you, the Moto X Play was launched back in July as a toned-down variant of Moto X Style. It features 5.5-inch 1080p display and is powered by 1.7GHz octa-core Snapdragon 615 64-bit processor with 2GB RAM. It comes in two storage models- 16GB and 32GB, which can be further expanded via microSD card up to 128GB. For imaging there is 21-megapixel rear camera with dual-LED flash and 5-megapixel front shooter. The 4G LTE enabled phone is fueled by 3630mAh battery.

There is no word on pricing of the Motorola Moto X Play, but a recent Zauba listing revealed the declared value for the imported unit to be Rs. 22,228. This is not the final retail price due to the exclusion of taxes and other charges.
Read more »
Posted by at No comments:
Labels: , , ,

LG's new SmartThinQ Sensor monitors home appliances

LG's new SmartThinQ Sensor monitors home appliances
LG's new gadget, SmartThinQ Sensor works with traditional home appliances and helps you monitor day to day home appliances and let you control them.

SmartThinQ Sensor is a circular device and can be attached to existing home appliances such as washing machine or refregirator, to sense feedback such as vibration and temperature. 

For instance, attaching the sensor to a washing machine door transforms its into a smart appliance and you will be informed when the washing is done. When attached to refrigerator SmartThinQ sensor will send a notification to a paired smartphone when a particular food is about to expire. It can also be connected to an air conditioner or other appliances which allows users to take control remotely via SmartThinQ app. The sensor also keeps track of how many time you opened the door even when you're not at home. 

LG also introduced an AllJoyn compatible Smart Lightwave oven and Smart Air Conditioner. AllJoyn is a collaborative open-source software framework that makes it easy for devices and apps to discover and communicate with each other.

The Smart Lightwave Oven from LG is WiFi enabled and users can download, update and share recipes with friends via their mobile devices. It can even perform self-diagnosis and help find solutions and repair information online via LG's service center. While the Smart Air Conditioner can be controlled via smartphone and will inform owners when to replace the air filter.

The gadgets will be showcased at IFA event in Berlin next week.

Read more »
Posted by at No comments:
Labels: , , ,

Motorola Moto X Force price, launch details tipped

Motorola Moto X Force price, launch details tipped
Motorola is said to be working on a 'shatterproof' smartphone codenamed Bounce (courtesy of @Upleaks). The phone will be called Moto X Force. 

Motorola Moto X Force will borrow its design from the new Motorola phones, Moto X Play and Moto X Style which were launched back in July this year. The phone is said to have a shatterproof design which indicates it could have a MIL-STD rating.
Motorola Moto X Force price, launch details tipped
As for specs, Moto X Force is tipped to feature 5.43-inch QHD (1440 x 2560 pixels) display and will be powered by 2GHz Snapdragon 810 processor with 3GB RAM and 32GB/64GB storage capacity. It will sport 21-megapixel rear camera and 5-megapixel front shooter, and will be backed by a 3760mAh battery. The device will mostly run Android 6.0 Marshmallow. Motorola is also rumored to bring Moto Maker customization option.

The Motorola Moto X Force is expected to launch in December and will carry the price tag CNY 4000 (Rs. 42,000).
Read more »
Posted by at No comments:
Labels: , ,
Subscribe to: Posts (Atom)